Product Care

WADER AND JACKET CARE AND MAINTENANCE

Breathable garments should be washed by hand, in a bathtub, in cold water using a breathable fabric detergent. Rinse thoroughly and allow to air dry. Do not dry clean or put in the dryer. A water repellent treatment will rejuvenate the water resistant finish on your waders.

 

APPLYING WATER REPELLENT TREATMENT

After the waders are washed and thoroughly rinsed, saturate the outside of the waders with water repellent treatment. Allow product to drip-dry. "Set" the treatment with heat using a blow dryer or iron (low setting), avoiding the stocking foot attachment area. Be careful not to apply too much heat to the seam tape.

 

REPAIRING YOUR BREATHABLE GARMENTS

Tears, punctures and pinholes do happen

1) Turn waders inside out.

2) Fill with water to identify leak area.

3) Dry and apply AquaSeal® to the area and cure for six hours.

If you have any questions please don’t hesitate to contact us +64 4 238 2823.

 

LONG-TERM STORAGE

Dry completely before storing to avoid mildew. Store the away from heat or direct light. Hung in a closet on a hanger or laying flat under a bed is best for long-term wader storage.

 

IF YOU NEED TO RETURN A RIVERWORKS PRODUCT

Return the cleaned product to either, the place of purchase with proof of purchase or

Direct to Riverworks with a copy of your proof of purchase and a completed return form